Advance EPSILON 8 Motor (Discontinued)

//Advance EPSILON 8 Motor (Discontinued)

Advance EPSILON 8 Motor (Discontinued)


Out of stock

SKU: advance-epsilon-8-motor Category:

Advance EPSILON 8 Motor

Because of its good takeoff qualities, high stability, damped behaviour and compactness the EPSILON 8 motor is ideally suitable for paramotoring. Hybrid-Risers, which can also be used for flight without the motor, are recommended.


  • Upper support point

    The Hybrid-Risers are fitted with two different hang points, so that the best match of harness and motor system can be achieved without having to change the brake line length.

  • Lower support point

    with disabled Trimmer.

  • Trimmer released

    with Trimmer disabled. The Hybrid-Risers are fitted with trimmers. These can be used for both counteracting the turning effect of the motor and adjusting the flying speed.

  •  Trimmer fixed

    For flight without a motor the trimmers must be disabled by hooking them into the main carabiners. The wing then keep its paraglider certification.

  •  Speed system

    The Hybrid-Risers have a speed system for use when flying without the motor.

Technical Data

EPSILON 8 with Hybrid-Risers 25 27 29
Takeoff weight paramotor kg 70-140 80-150 95-150
Length of risers (upper hang point) cm 43 44.5 46
Length of risers (lower hang point) cm 50 51.5 53
Trimmer travel (LTF 23-05) cm 7.0 8.0 9.0
Certification DGAC DGAC DGAC


Epsilon 8 Colours

Provided that it is equipped with the Hybrid-Risers appropriate to the EPSILON 8 has EN / LTF certification as a paraglider. Sizes 25 to 29 have DGAC certification for motor flying. Relevant certified weight ranges are shown in the adjoining table.


There are no reviews yet.

Be the first to review “Advance EPSILON 8 Motor (Discontinued)”

Your email address will not be published. Required fields are marked *

New in our shop