Icaro Nerv 2.0
Nerv by Icaro 2000 is a helmet that has long been a favourite with paraglider, hang glider and microlight pilots all over the world, for its lightness, style and certified safety. But technology is constantly developing, and so we have completely redesigned Nerv with new features to offer even higher levels of performance, protection and comfort. We have recalibrated its internal ventilation, added an inner cap in the high-tech fabric Coolmax, and optimized sizes with two new outer shells. Characteristics that remain unchanged are the Italian design, the appealing style and colours, and the quality of a helmet made exclusively in Italy. We are proud to present Nerv 2.0!
Nerv 2.0’s stylish lines are the result of design by Ignazio Bernardi in collaboration with Italy’s most prestigious helmet development company.
A new helmet starts from the desired technical characteristics, and it is given form by means of artisanal processes. In fact the first prototype is sculpted from wood and plaster, and it is then scanned and codified into a 3D file. This in turn is used for computer simulations on which colours and detail design can be perfected, and it provides the data necessary for the CNC machines that will cut the dies for the outer shell and the polystyrene inner shell.
Similar processes are used for all the other helmet components, such as ear covers, visor and so forth.
Once everything is ready, the helmet can be assembled, checked for quality, tested and packaged. The finished product is a fine example of Italian design and technological prowess.
Two outer shell sizes, made of strong polycarbonate
For Nerv 2.0 we have introduced two outer shells, a larger version for sizes 60 and 61, and a smaller version for sizes 54-55, 56-57 and 58-59.
The principal reason for this change was to increase safety by means of a higher thickness for the inner polystyrene shell.
The smaller outer shell is 222 mm in width, the larger version is 236 mm in width. A minimal difference, just 14 mm.
But this was essential for passing the stringent impact tests required for EN 966 certification.
We have retained the 3mm-thick polycarbonate outer shell, which is both exceptionally light and very strong.
Inner polystyrene shell
We have increased the thickness of the inner polystyrene shell, in order to further enhance the safety and protection offered by Nerv 2.0
Vents on the helmet’s exterior guarantee interior air flow, with two channels between the outer shell and the polystyrene inner shell optimizing comfort and temperature in flight.
The size of a helmet is specified by the comfort padding’s inner circumference.
The size number therefore corresponds to the head circumference in centimetres, which you can determine using a soft measuring tape.
Please note that as there are two versions of the outer shell, one for the larger and the other for the smaller sizes, it is important to choose the correct version.
If you are in doubt whether to opt for the larger helmet with size 60, or the smaller helmet with size 59, we recommend choosing the larger version. The larger helmet can be adjusted using the rotary size regulator described below even if it initially feels too large. On the other hand, there is no way of adjusting the smaller size 59 helmet if it feels too tight.
Rotary size regulator
The new rotary size regulator can be used to modify not only the helmet’s internal circumference, but also its position with respect to the back of the neck.
It is simple to adjust and the operation can be performed directly by the pilot.
Comfort is ensured by padding on the size regulator’s inner surface.
Interchangeable internal padding
We have introduced a cap in the high-technology fabric Coolmax, which increases comfort by wicking perspiration away from the head and enabling it to evaporate rapidly, keeping you cool and dry.
Every Nerv 2.0 helmet has a label that guarantees the use of this famous new textile, which is also soft to touch and so makes the helmet even more comfortable.
L = size 60 – 61
M = size 57 – 59
S = size 53 – 56
The cap is quick and easy to change for a better fit. Size can be further adjusted using the rotary size regulator at the back of the helmet.
Another important benefit of this internal padding system is that you can easily remove it and replace it with new padding, or simply wash it.
The visor is an optional extra.
It is made of polycarbonate with anti-scratch and anti-fog treatment.
Four versions are available: transparent, tinted grey, orange, mirror.
Foam edging can also be applied to reduce air circulation inside the visor.
E.N. 966 certification